Instruments

Properly selected saw blade – a guarantee of high-quality and safe wood processing

Circular saws are an effective equipment for cutting wood. They account for the most accidents. Many of them would have been prevented if equipment operators used quality saw blades and a safe method for using them. Good products are neatly sawed and can last as long as possible, moreover, when they are used, the circular saws wear less.

What should be saw blades

Circular saws are an effective equipment for cutting wood. They account for the most accidents. Many of them would have been prevented if equipment operators used quality saw blades and a safe method for using them. Good products are neatly sawed and can last as long as possible, moreover, when they are used, the circular saws wear less.

What should be saw blades

For the saw to be convenient to use, the disks for it must be balanced. Other important parameters of components are resistance to lateral loads, heating, blunting and its technical parameters. The balance of low-quality discs always leaves much to be desired, as a result they heat up faster, and when sawing the product can quickly begin to become dull and even deform.

The use of such products may be hazardous. A poor-quality disc can become dirty faster – glue and resins stick to its surface. In addition, this can cause jamming of the disc and injury. But even if everything goes well, a low-quality saw blade will not be able to get an accurate and beautiful cut, and its use will lead to premature engine failure and damage.

Universal saw blade – is it possible?

Many would like to purchase a universal saw blade that is suitable for all occasions. However, such a product simply does not exist. This is due to the huge amount of materials and tasks that they solve. Some discs allow you to achieve high-quality cut in soft wood, others – in hard. Some products are ideal for working with composite materials, and there are models that are designed specifically for external cuts. There are accessories designed for longitudinal and transverse cuts. For each task there is an optimal type of disk.

The best solution would be to have several saw blades, but in this case the cost of their purchase will increase. However, such costs are fully justified, since the speed and quality of work will be significantly increased.

The modern market for saw blades offers a wide range of products. All their diversity can be divided into two types – monolithic products and material with carbide teeth. The former may be sharpened when blunted, while the latter wear less.

Properly selected saw blade - a guarantee of high-quality and safe wood processing
logo

Leave a Comment